News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Antique straight razor

Started by Jan, June 28, 2019, 09:58:35 AM

Previous topic - Next topic

Jan

Recently I received torso of an antique German straight razor. The razor was completely destroyed, whole pieces of the bevel were broken off the blade. I decided to reshape the razor torso into a letter knife. Because the carbon steel is really hard I used fine diamond wheel.

Jan

John_B

Great job re-purposing the razor.

Is it letter opener sharp or Tormek sharp?
Sharpen the knife blade
Hone edge until perfection
Cut with joy and ease

Jan

Thanks, John! The knife bits into my fingernail.  ;)

Jan

Antz

Very nice Jan! You cleaned it up very nicely.

Antz
"But thanks be to God, who gives us the victory through our Lord Jesus Christ."
‭‭1 Corinthians‬ ‭15:57‬ ‭

Jan

Thank you Antz! For polishing the blade I used smaller felt wheel mounted in a drill press and Tormek honing compound.

Jan

Josu V

#5
Good job; and beautiful razor  :)
Abusus non tollit usum

Jan

Thank you, Josu! It's a real pleasure to hold such an old beautiful tool in hand.  :)

Jan