News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Arkansas Reality ( a differnt knife jig)

Started by Riverman, June 20, 2019, 10:36:44 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Riverman

June 20, 2019, 10:36:44 PM Last Edit: June 21, 2019, 02:03:48 AM by Riverman
Been back to the drawing board and came up with what is hoped to be a self centering knife jig,using various parts from former knife jigs.Still some refinements to make but its a start on the quest for the proverbial self-centering knife jig.Thanks all for the valuable info & pics.Also drilled and tapped the rods in several places to be able to set different distances.Insight & info welcomed,Regards,Steve

jeffs55

#1
June 20, 2019, 10:53:11 PM
What does it do that the current knife jigs do not do? Why self centering?
You can use less of more but you cannot make more of less.

Riverman

#2
June 20, 2019, 11:52:28 PM
Equal bevel on both sides

jeffs55

#3
June 21, 2019, 01:23:31 AM
Now I see said the blind man. Good job. That has always been a pet peeve of mine. I just could not figure what was being centered.
You can use less of more but you cannot make more of less.
Print
Go Up Pages1
User actions