News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

SVM 45 Custom

Started by hunter, August 19, 2018, 06:08:11 PM

Previous topic - Next topic

WolfY

Quote from: Jan on August 22, 2018, 02:45:50 PM
Hunter and Wolfy thanks for presenting your great ideas.  :)

Half turn of the M12 thread with default pitch 1.75 mm will change the bevel angle by almost 0.7 degrees. I have assumed 200 mm stone, 20 degrees bevel angle and 133 mm blade protrusion.

Jan

Thanks Jan for the exact calculation. I think it will only do good for the uneven angle of the knife jig :) After a couple of times I guess it will be easy to learn toward what direction to turn the knife.
Giving an advice is easy.
Accepting an advice is good.
Knowing which advice is worth adopting and which not, is a virtue.