Leatherman multi-tool sharpening

[wootz]

Yep, remeasured my SVM-140 and the offset is 1.55mm

[Sharpco]

It depends on the tape, but duct tape can be rather slick/smooth on the outside, and not hold well.

You might look at wootz's "Knife Jig Solution"... see if there's a tip in there that will correct the asymmetry.  (I think this is what Rick is referring to).

But realistically, that knife may be too small to adequately sharpen with that jig... you probably can do it... but may not be the best way.  Might be worth looking into Herman Trivilino's "Homemade Knife Rest"... or just freehand sharpening it.

I hope Tormek will make these various Jigs.