News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Tighten the shaft nut

Started by Sharpco, December 08, 2017, 02:05:19 AM

Previous topic - Next topic

cbwx34

Quote from: sharpco on December 11, 2017, 11:41:35 AM
I solved it myself today. While tightening the nut with a wrench, hold the drive wheel with another hand.

Kinda figured that would be the case... otherwise, the drive wheel would slip if that nut was at all loose.
Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform.
(or Click HERE to see other calculators available)