News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Finishing with SJ-250

Started by Sharpco, October 22, 2017, 04:55:01 AM

Previous topic - Next topic

cbwx34

Quote from: sharpco on November 07, 2017, 02:19:01 AM
I have tried many times with the way wootz told me. Certainly, I was able to get better results than before. Thank you. wootz.

But after honing with SJ, I was able to get a sharper edge using the leather wheel.

"Sharp" is a relative term... how are you testing for sharpness?  (Type of media being cut and type of cut (push vs. slice)).
Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform.
(or Click HERE to see other calculators available)

Sharpco

Quote from: cbwx34 on November 07, 2017, 03:40:38 PM
Quote from: sharpco on November 07, 2017, 02:19:01 AM
I have tried many times with the way wootz told me. Certainly, I was able to get better results than before. Thank you. wootz.

But after honing with SJ, I was able to get a sharper edge using the leather wheel.

"Sharp" is a relative term... how are you testing for sharpness?  (Type of media being cut and type of cut (push vs. slice)).

I tried push cutting with paper.