Jigg for axs

[Haldor]

is there anyone with a good idea of ​​a jig for such axes

[cbwx34]

is there anyone with a good idea of ​​a jig for such axes

Tormek has an ax jig, the SVA-170... seen HERE ... for axes.

Or are you looking for something else?

[Haldor]

sva 170 is for normal axes with about 10-20 cm length of ax head.These axes on the picture are 20-40cm long. So the 170 jig comes for the stone, so I do not get the right angle on the edge.

[cbwx34]

sva 170 is for normal axes with about 10-20 cm length of ax head.These axes on the picture are 20-40cm long. So the 170 jig comes for the stone, so I do not get the right angle on the edge.

Ah... cool.

Only thing I can think of (I'm not an ax sharpener though) is Herman's  "Knife Rest" jig... might work for what you're looking for.  Here's the thread...

https://forum.tormek.com/index.php?topic=1592

... and a video on how it works...

https://youtu.be/AcWAkQmoU8c

...if this doesn't work, I'm sure an actual "ax sharpener" will be along to help out.

You might also look at this thread for some ideas...

https://forum.tormek.com/index.php?topic=3448

... about 1/2 way down the first page, there's a post where Jan uses a clamp instead of the ax jig.  (Might spark some ideas).

Hope that helps.