News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Universal Support interchangeable?

Started by Stawdust, March 29, 2017, 01:43:26 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Stawdust

March 29, 2017, 01:43:26 AM
Does anyone know whether a Universal Support from a T7 will fit the mounts on a T8 please?
Many thanks.

Ken S

#1
March 29, 2017, 01:52:43 AM
Yes, they are completely interchangeable. I happen to have both a T7 and a T8. I store the universal supports all together. The only support which I have marked is the one for the T4. It is 10mm shorter to prevent the jigs from travelling too far with the 40mm wide grinding wheel.

To the best of my knowledge, the only accessory which is not interchangeable is the water trough.

Ken

Stawdust

#2
March 30, 2017, 01:04:43 AM
Thank you Ken - another quick reply!

Ken S

#3
March 30, 2017, 01:15:52 AM
Pleased to help!

Keep posting.

Ken
Print
Go Up Pages1
User actions