Victorinox Knife

[bobl]

with victorinox knives, try doing a 20 degree bevel .
40degree tru. although this knife does come up as a 15/30 degree true. it actually does sharpen better on a 20/40 then finished on the honing wheel and wiped off.
Bob The Knife Grinder.

[Ken S]

Bob, just use a 6mm thick spacer between the tool and the wheel, and the tool should be calibrated (approximately) for the 20 degree bevel. A small square of plywood or similar will do the trick. Write "20 degrees" on it.

Ken