News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

magnet for the T4 water trough

Started by Ken S, February 17, 2015, 02:49:15 AM

Previous topic - Next topic

Ken S

I found an ordinary three quarter inch diameter magnet (it looks like a nickel) quite adequate. They are inexpensive and should be available at any hardware store. At present, it is attached to the tray with blue masking tape. I don't recommend the blue tape as a
"forever fix", but it has held up reasonably well. Black electrical tape held up with my old water trough for several years until I removed it to switch it to the T4 tray.

Ken

Jimmy R Jørgensen

I use the Harddisk magnet to. inexpencive (if you have a broken harddrive) and pretty powerfull magnet.
If it's not broken, DON'T fix it.