Small knife jig per Tormek User Group

[Elden]

Have you tried Razor Sharp paper wheels? I believe they have a 1/4" wheel. With profiling, if necessary, that should handle some pretty small and odd shaped blades. It appears that what Grizzly carries are Razor Sharp.

http://www.grizzly.com/products/8-Razor-Sharp-System/G5937

As with anything, there will be a learning curve.

http://www.bladeforums.com/forums/showthread.php/578787-paper-sharpening-wheels-when-your-time-is-important-to-you

[Don Green]

Eldon

Yes.  Don't have a 1/4" wheel only a 3/4", will check with the maker (Business is in Tulsa) and see if he has 1/4"

Thanks!



Don

[Elden]

Don,

Did you get a 1/4 inch paper wheel? If so, how is it working for you?

[Don Green]

Elden

Sorry for the delay.  Been sick.  No I didn't find a 1/4" wheel.  The Archery Compay apparantly has gone out of business.

Don Green

[Rhino]

I just cleaned my car and found the following under the seat:

http://www.amazon.com/Lisle-52000-Razor-Blade-Scraper/dp/B0002SR88C

Probably the tool was accidentally left in my car a few months ago during inspection.  I am thinking I can use this modified, or unmodified to sharpen small knives. 

Unmodified - I would have to re-clamp my knife to sharpen the other side.

Modified - I might bend it a little bit on a vice.

I probably won't modify it.  It is a nice tool as is.

[Herman Trivilino]

I would be tempted to clamp it in my SVS-32 and use it to sharpen or at least hone razor blades.