News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Leather separation

Started by Steven L, January 14, 2007, 12:43:35 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Steven L

January 14, 2007, 12:43:35 AM
The leather is pulling away from the wheel. This is not occurring at the seam. Is there anything I can do or is it time to get a new honing wheel?
Print
Go Up Pages1
User actions