News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Hello

Started by tom k, June 11, 2012, 02:01:37 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

tom k

June 11, 2012, 02:01:37 AM
Bought a Supergrind 1200 yesterday will be looking for advice on how to get the best from it 8)

Regards Tom...NW Kent UK

Mike Fairleigh

#1
June 11, 2012, 06:50:55 AM
Welcome Tom!
Mike

"If I had 8 hours to chop down a tree, I'd spend 7 sharpening my axe."  --Abraham Lincoln

Ken S

#2
June 14, 2012, 02:23:33 AM Last Edit: June 19, 2012, 03:20:26 AM by Ken S
Welcome, Tom.

Be sure to watch the videos on sharptoolsusa.com.  Jeff, our moderator, does an excellent job of explaining how to get up and running.

Next, my standard (and by now probably boring to the rest of the forum) advice:  Start with a very simple tool like a mid size chisel, about 3/5"(correction 3/4") or 18 mm.  Exact size is not important.  Practice on it until you are starting to feel fluent and confident.

Best of luck, and keep us posted.

Ken
Print
Go Up Pages1
User actions