News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Bevel angle chart?

Started by jrg1950, January 03, 2011, 05:51:36 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

jrg1950

January 03, 2011, 05:51:36 PM
Hi Jeff
Does Tormek have a chart that tells the suggested bevel angles to set for sharpening different tools, blades, etc.
Jrg1950
Joe R. Gray

Jeff Farris

#1
January 03, 2011, 08:26:38 PM
For each individual tool, bevel angles are discussed in the handbook.
Jeff Farris
Print
Go Up Pages1
User actions