News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

#79 Side Rabbet plane, sharpening

Started by mnarges, December 05, 2007, 04:06:46 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

mnarges

December 05, 2007, 04:06:46 PM
Has anyone sharpened the skew beveled irons from this plane.  Which is the suggested jig?

Jeff Farris

#1
January 09, 2008, 10:45:58 PM
Sorry for the delay in replying.  I'm kind of computer illiterate, and got locked out of my own house!  ;D

These can be sharpened with either straight edge jig -- SVH-60 or the new SE-76.  Put the blade in the jig with the clamp only snug, then align the blade parallel with the grindstone.


Jeff Farris

mnarges

#2
January 17, 2008, 06:05:26 PM
Jeff, thanks a lot for the suggestion. I will give the ideas a try.

Sincerely,

Mike Narges
Print
Go Up Pages1
User actions